I like camping more and more recently, but this is my first time for truck bed tent camping. Next, I refer to the modification example of pickup camping on the Internet. How does the pickup become a camping tent?
Finally, after my transformation, my truck camping tent works for the following reasons.
When loading the shift tent, the truck body is parked on the side of the shift pop up camping tent, the staff shakes the crank counterclockwise, and the rotation of the crank causes the shaft to start to rotate, so that the gears rotate, and the gears mesh with the rack to make it fixed The frame moves to the right in the carriage. When the leftmost side of the support plate leaves the carriage, stop turning the crank. At this time, the wire rope is in a taut state. The fixed frame is balanced by the tension of the wire rope, and the hydraulic lift is lifted by the electric control box. When the rod is opened, the hydraulic lifting rod is slowly extended until the guide wheel at the bottom of the support plate touches the ground, close the hydraulic lifting rod, move the parts of the shift tent to the upper part of the support plate, open the hydraulic lifting rod, the hydraulic lifting rod When shortening, the support plate rises until the guide wheel at the bottom of the support plate is level with the height of the guide groove, shake the handle clockwise, the gear drives the rack to move to the left, and the shift tent is loaded into the compartment; unload the shift When using a tent, the operation method is the same as when loading.
It contains the truck body and the carriage; the upper part of the right side of the truck body is fixed with a carriage; it also contains a fixed frame, a rack, a gear, a shaft, a crank, a No. 1 lug, a wire rope, a No. 2 lug, and a No. 1 chute , Support plate; the front and rear side walls inside the carriage are symmetrically fixed with a chute, the upper and lower sides of the front and rear sides of the fixed frame are fixedly provided with sliding blocks, and the sliding blocks are slidably arranged inside the first chute; the fixed frame The front and rear sides of the upper side are symmetrically fixedly provided with racks; the upper part of the right side of the carriage is movably provided with a rotating shaft. The front and rear ends of the rotating shaft are respectively rotatably penetrated on the front and rear side walls of the carriage through the bearing. The front side of the carriage, and the extension end is fixedly provided with a crank; the shaft in the middle of the carriage is fixedly sleeved with two gears, and the two gears are respectively engaged with the racks corresponding to the upper and lower positions; the upper right side of the fixed frame The front and rear sides of the vehicle are symmetrically fixed with No. 1 Hanging Tree Tent Outdoor Traveling Mosquito Nets Camping Ultralight Waterproof Suspension Hammock Tentt ears, and the upper and lower sides of the carriage are symmetrically fixed with No. 2 hanging ears, and the upper and lower positions of the No. 1 hanging ear and the No. 2 hanging ear are fixedly connected with a wire rope; The four corners of the bottom of the fixed frame are vertically fixed with hydraulic lifting rods. The bottom end of the hydraulic lifting rods is fixedly provided with a support plate, which is arranged above the bottom of the carriage; an electric control is fixed on the rear side wall of the carriage. The said hydraulic lifting rod is connected with the power supply in the electric control box.
